Putter Length, Posture, Path & Aim by Core Zone
Copyright 2026 Wright Balance®
David F. Wright, Ph.D., PGA
"Never accept a conclusion you cannot derive from fundamental truths."
Anonymous
The above quote represents the epitome of Wright Balance®. As you will see in the video content that follows, there are demonstrations of "truths" you can experience yourself. And, as I have always said: "Experience is the measurement of Truth".
NOTE: Michigan State and Laval University (Canada) have been testing and using the Wright Balance® exercise and training technology with their Men's Golf teams.
Michigan State has been testing and using Wright Balance® technology for well over 2 years. Laval University has been testing and using Wright Balance® technology for over 5 years.
Wright Balance® Professional, Chad Kurmel sent me the following note last week: "I played in the Senior PGA Club Pro last week and finished 10th. I qualified for the Senior PGA Championship in April at Concession (2027). Your putting stuff is a game changer! Thank you!" There were 35 PGA Professionals who qualified for the Senior Tour Championship. Chad finished 10th.
Please read & view the videos in this eBook with:
- A putter
- Wright Balance® Wristbands,
- You will need to know your Dominant Core Zone
- Knowing your Dominant Core Zone will provide you with your 8 inch Performance Stance Region (PSR) for play.
You and your students will experience measurable improvement.
Now, for the latest eBook on Putting. As you viewed in the last eBook, when you find your heel to toe balance that matches your playing Core Zone, you are able to roll a ball on a 3 foot metal yard / meter stick precisely on line and aimed precisely at your target. The impact of your 8 inch playing stance range (PSR) your grip, how you set your posture & the impact putter length has on heel to balance as posture is set all work together to create a precise aim and path.
No longer do players need to purchase a putter to reduce face rotation through the stroke or at finish. Our Wright Balance research shows that face roll is a result of imbalance in the body, not a process that is reduced with any putter style.
I am going to start the videos in this eBook with a demonstration of how to find your heel to toe balance, correct posture, spine angle and putter length by Core Zone.
These videos assume you have watched the video on how to grip a putter. If your grip is not correct or if the middle finger of each hand on the underside of the putter grip doesn't have the matching Power Spot to your Performance Stance Range (PSR), you will have no success in replicating what you are going to watch.
If these fundamentals are set correctly at address, your aim will be on target and you will be able to roll a ball down a 3 foot metal yardstick every time you set up as demonstrated in the following 3 videos. You will note the putter has NO face rotation at finish. If you observe face rotation, hold your finish and you will note your hips rotated open or closed (generally open) through your stroke. If so, one link in your setup chain is creating changes in your heel to toe balance. This "test" is a variation of the Downswing Club Path Test (DPT).
The first video describes the use of 2 bars, one on the chest and the other on the hips, both on the rotational plane. The bars were attached by bungee cords during the original research in the late 90s and early 2000s in Dr. Frank Jobe's biomechanics lab. During that early research the bar on the shoulders was used only in a static posture. Movement created a distortion of the shoulder line measurement. This research demonstrated that the shoulder line and the hip line were different measurements. However, the shoulders and hips are both on the rotational plane. The following image shows the use of both bars. Note the light sensors on the bars as indicators of the orientation of the hip line and shoulder line relative to a target line.
The apparatus shown in the following image was used to measure shoulder and hip rotation with students in lessons following the 6 plus years in Dr. Jobe's lab. This apparatus further confirmed that the hips and shoulders are on the rotational plane and separate measurements.
How to Find Your Spine Angle & Set Putter Length for Heel to Toe Balance
YouTube Link: https://www.youtube.com/watch?v=JrUg_Q75dYM
8 minutes & 26 seconds
Question 1
Research measures in the original Biomechanics lab and subsequent manual measurements during lessons showed:
- That the shoulders and hips were exactly the same measurements on the rotational plane
- That the shoulders were always 5 degrees greater than the hips
- That the shoulders and hips were distinctly different measurements on the rotational plane
- That the measurements of the shoulders and hips are not as important as the measurement of the Carrying Angle**
Answer
- That the shoulders and hips were distinctly different measurements on the rotational plane
Question 2
When looking at shoulder and hip rotation, the easiest way to test shoulder rotation is:
- Measure by placing brackets on each shoulder while the student stands in their 8 inch range and observe the laser line in inches from "0"
- By setting up in posture in the 8 inch PSR and noting the alignment of the hands as they hang in front following a shoulder shrug
- By measuring wing span
- By testing shoulder rotation once the player is in Posture
Answer
- By setting up in posture in the 8 inch PSR and noting the alignment of the hands as they hang in front following a shoulder shrug
Question 3
How can I set my hips and shoulders parallel at the same time by standing in my 8 inch Performance Stance Width Range (PSR):
- Placing a heavy weight across my chest and assuming my posture
- By setting my posture with a putter length that fits my spine angle.
- By standing on an alignment stick to find my heel to toe balance
4.There is no way to set my hips and shoulders parallel simultaneously.
Answer
- By setting my posture with a putter length that fits my spine angle.
Demonstrating the Impact of Square Shoulders and Square Hips by Core Zone on Putter Length, Aim & Path
The following 3 videos demonstrate the process of setting the hips and shoulders square to the target line by setting posture in the Performance Stance Width Range for each Core Zone. As posture is set, the spine angle is adjusted to square the shoulders to the hips and the target line. As you will see, Putter Length plays a significant role in setting posture
Putter Length Impacts Posture, Aim & Path for a UPPER CORE Player
YouTube Link: https://youtu.be/Kkp8-OfP1T4
9 Minutes & 40 seconds
Question 4
The shoulder rotational plane is set "neutral" at address:
- When the thigh angle matches the Carrying Angle
- When the spine angle is set and the hands line up with palms toward thighs
- When the putter length is 34 or 35 inches
- When the Wright Balance® Wistbands are set on both the left & right wrists.
Answer
- When the spine angle is set and the hands line up with palms toward thighs
The following short video reviews how to set the Upper Core Posture while standing on an alignment stick. Note the impact of shoulder and hip rotation when posture is set incorrectly.
Setting Upper Core Posture for Heel to Toe Balance
YoutTube Link: https://youtu.be/-XjbmI9UG1w?si=hHnauHZZ_YXc58vA
2 minutes & 16 seconds
Question 5
When setting the Upper Core posture while standing on an alignment stick,
- Your backside goes out setting ideal balance on the alignment stick
- Bending from the hips sets the balance over the balls of the feet
- How posture is set doesn't matter when standing on an alignment stick
- Thigh angle and Spine angle match
Answer
- Bending from the hips sets the balance over the arches
Putter Length Impacts Posture, Aim & Path for a MIDDLE CORE Player
YouTube Link: https://youtu.be/X1x0IQ5nz0s
6 minutes & 10 seconds
Question 6
When the Middle Core Player sets their posture, their spine angle and thigh angle relationship is:
- The spine angle is greater than the thigh angle and it is set by how the hands hang in posture
- The Spine angle and thigh angle are identical
- The thigh angle is greater than the spine angle
- As long as the balance at ground level creates a solid path, who cares?
Answer
- The spine angle is greater than the thigh angle and is set by how the hands hang in posture
The following is a review of the impact, putter length and posture on a Middle Core Player
Putter Length, Posture & Path for a Middle Core Player: Review
YouTube Link: https://youtu.be/Z4H6VSixehg
2 minutes & 25 Seconds
Question 7
What variable MOST impacts the spine angle at address?
- How Posture is set
- The players coaching on posture set
- The length of the putter
- The length of the 7 iron
Answer
- The length of the putter
Posture, Balance & Putter Path for the LOWER CORE Player
YouTube Link: https://youtu.be/mjSmgtIzBIE
5 minutes & 42 seconds
The following short video is a review of Putter Length, Posture and Grip.
Putter Length, Posture, Grip & Path: A Review
YouTube Link: https://youtu.be/Ox09E9_93JU?si=XN39wo9EuG8DPncG
3 minutes & 45 seconds
Question 8
How does Putter Length impact the path and face position of my putter at finish?
- It is imperative to have a putter length and weight and appearance that fits the player's "eye" for correct aim and path
- Putter Length has no specific impact on path other than the weight of the putter and the balance of the putter when fit properly
- Putter length sets spine angle and there is a simple "arms hang" test to confirm ideal length
- None of the above
Answer
- Putter length sets spine angle and there is a simple "arms hang" test to confirm ideal length
How to Grip Your Putter: An Outlier
PGA Tour Veteran, Larry Rinker and Payne Stewart tied for number 1 in putting 1990. When Larry viewed a Wright Balance video on** How to Grip a Putter he told me he thought it was wrong. He said he always had the putter a bit in his palm in his lead hand and he sent the following video.
Putter Grip Outlier: Larry Rinker
YouTube video link: https://www.youtube.com/watch?v=sz_IkYwrOlU
1 minute
This video is a short demonstration of a workaround of how to find the Dominant Core Zone without a bar and bungee. If you use this strategy, be certain you don't bend too far forward, especially in the Upper Core Performance Stance Range-PSR- (8 to 16 inches plus or minus 1 inch). If you bend too far forward you may get a false positive as that is also how you determine spine angle as you will see in the following videos.
A Workaround for Finding Dominant Core Zone
YouTube Link: https://youtu.be/pShPu53oPMA
2 minutes & 47 seconds
For those of you who want a deeper understanding of the Wright Balance® Wristbands impact on Core Symmetry in general and the Carrying Angle in particular, this video is for clarification.
Wright Balance® Wristbands, the Carrying Angle & Core Symmetry, A Review
7 minutes & 45 seconds
YouTube Link: https://www.youtube.com/watch?v=nCjNOaSqVNQ
In closing, please view these short videos, the first showing the impact of the wristbands on a swing based upon which wrist the Wright Balance® Wristbands are placed and the second on the use of multiple Wright Balance® Wristbands.
2 minutes
YouTube Link: https://www.youtube.com/watch?v=q0cjHUJceg8
Grip Size & Wristband Clarification
Question
If I am playing any sport that requires a swing as in golf, baseball or cricket or a stroke as in tennis, on which wrist should I place the Wright Balance® Wristband?
- My non-dominant hand wrist or the side I don't swing or stroke from.
- It doesn't matter as long as the Wright Balance® wristband totally encompasses my wrist
- The hand side I will swing or stroke from (for example, if I swing from my right side I will place the Wright Balance® Wristband on my right wrist)
- None of the above
Answer
- The hand side I will swing or stroke from (for example, if I swing from my right side I will place the Wright Balance® Wristband on my right wrist)
Impact of 2 Wright Balance® Wristbands on the Same Wrist
1 minute
YouTube Link: https://www.youtube.com/watch?v=0S6_SD2qVXk
Question
True or False
Wearing multiple Wright Balance® Wristbands increases the impact of the bands.
Answer
False
Injuries and the Wright Balance® Wristbands
Be aware that players who arrive following an injury may have little to no initial response to the Wright Balance® Wristbands. In that case, do the corrections demonstrated in the Wright Balance® Pain Management eBook. Following the corrections, return to the Wright Balance® Wristbands and do the Wright Balance® Express.
NOTE: ALWAYS wear the Wright Balance® Wristbands during all exercise, practice and play and whenever you are lifting anything. Wearing the wristbands 24/7 isn't a bad idea.
History of Wright Balance Putter Fitting
The following is a link to the original chapter of a book published by Golf Magazine in 2010.
"The Greatest Putting Instruction Book Ever" circa 2010
https://wrightbalance.com/wp-content/uploads/2020/04/chapter-2-final-June-2010-1.pdf
Wright Balance has advanced the content of this 2010 Book Chapter via research resulting in:
- The Wright Balance® Wristbands impacting a square hip line and eliminating the need for grip sizing
- The 8 inch performance stance width ranges (PSR) by Core Zone
- The discovery of using how the hands hang in posture to change the spine angle to create precise heel to toe balance and to set shoulders square to target line
- The use of Putter Length to set the proper spine angle at address effecting precise heel to toe balance